English
– 3
CONTENTS
Contents Note the following before starting:
Jonsered has a policy of continuous product development
and therefore reserves the right to modify the design and
appearance of products without prior notice.
Long-term exposure to noise can result in permanent hearing
impairment. So always use approved hearing protection.
KEY TO SYMBOLS
Symbols ....................................................................... 2
CONTENTS
Contents ...................................................................... 3
Note the following before starting: ................................ 3
INTRODUCTION
Dear Customer, ............................................................ 4
WHAT IS WHAT?
What is what on the clearing saw? (BC 2145).............. 5
What is what on the clearing saw?
(FC 2145, FC 2145 S) .................................................. 6
GENERAL SAFETY PRECAUTIONS
Important ...................................................................... 7
Personal protective equipment ..................................... 7
Machine
′
s safety equipment ........................................ 8
Cutting equipment ........................................................ 11
ASSEMBLY
Assembling the handlebar and throttle ........................ 13
Assembling the handlebar and throttle ........................ 13
Transport position, handlebar ...................................... 13
Fitting blades and trimmer heads ................................. 14
Fitting the blade guard/combination guard, grass blade
and ball-bearing-mounted support cup ........................ 14
Fitting the blade guard and saw blade ......................... 14
Fitting the trimmer guard and trimmer head Trimmy SII 15
Fitting other guards and cutting attachments ............... 15
Adjusting the harness and clearing saw ...................... 16
Standard harness ........................................................ 16
Vector harness ............................................................. 16
FUEL HANDLING
Fuel safety ................................................................... 18
Fuel .............................................................................. 18
Fuelling ........................................................................ 19
STARTING AND STOPPING
Check before starting ................................................... 20
Starting and stopping ................................................... 20
WORKING TECHNIQUES
General working instructions ....................................... 22
MAINTENANCE
Carburettor ................................................................... 26
Muffler .......................................................................... 28
Cooling system ............................................................ 28
Air filter ......................................................................... 28
Bevel gear .................................................................... 29
Drive shaft .................................................................... 29
Spark plug .................................................................... 29
Winter use .................................................................... 29
Maintenance schedule ................................................. 31
TECHNICAL DATA
Technical data .............................................................. 32
EC-declaration of conformity (Applies to Europe only) . 33
!
WARNING! Under no circumstances may the
design of the machine be modified without
the permission of the manufacturer. Always
use genuine accessories. Non-authorized
modifications and/or accessories can result
in serious personal injury or the death of the
operator or others.
!
WARNING! A clearing saw, brushcutter or
trimmer can be dangerous if used
incorrectly or carelessly, and can cause
serious or fatal injury to the operator or
others. It is extremely important that you
read and understand the contents of this
operator’s manual.