32 – English
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting
attachments for the machine. The table indicates the lowest and highest values.
BC 2145 FC 2145 FC 2145 S
Engine
Cylinder displacement, cm
3
45 45 43
Cylinder bore, mm 42 42 41
Stroke, mm 32,5 32,5 32,5
Idle speed, rpm 2800 2800 2800
Recommended max. speed, rpm 12500 13500 13500
Speed of output shaft, rpm 9000 10500 10500
Max. engine output, acc. to ISO 8893, kW/ rpm 2,0/9000 2,0/9000 2,1/9600
Catalytic converter muffler Yes No Yes
Speed-regulated ignition system Yes Yes Yes
Ignition system
Manufacturer/type of ignition system SEM AM SEM AM SEM AM
Spark plug Champion RCJ 6Y Champion RCJ 6Y Champion RCJ 6Y
Electrode gap, mm 0,5 0,5 0,5
Fuel and lubrication system
Manufacturer/type of carburettor Zama C1Q Zama C1Q Zama C1Q
Fuel tank capacity, litre 0,9 0,9 0,9
Weight
Weight without fuel, cutting attachment and guard, kg 8,2 8,4 8,3
Noise emissions
(see note 1)
Sound power level, measured dB(A) 114 113 113
Sound power level, guaranteed L
WA
dB(A) 114 114 114
Sound levels
(see note 2)
Equivalent noise pressure level at the operator’s ear,
measured according to EN/ISO 11806 and ISO 7917,
dB(A), min./max.: 97/103 98/103 99/104
Vibration levels
Vibration levels at handles, measured according to EN/
ISO 11806 and ISO 7916, m/s
2
At idle, left/right handles, min.: 3,8/4,0 3,8/4,2 3,3/3,5
At idle, left/right handles, max.: 3,8/4,0 3,8/4,2 3,3/3,5
At max. speed, left/right handles, min.: 1,7/1,9 1,8/2,3 1,5/2,1
At max. speed, left/right handles, max.: 2,1/2,2 2,4/2,5 1,7/2,7
To Next Page
Loading...
