30 – English
MAINTENANCE
Temperature 0°C or colder:
The air filter holder is prepared so it can be changed for use
in the cold. Remove the air filter cover and air filter. Turn the
winter cover anticlockwise using a screwdriver so that the
preheated air from the engine can pass inside the carburettor
compartment and prevent, for example, the air filter from icing
up (see figure).
For temperatures below -5°C and/or in snow conditions there
is also:
• a special cover for the starter housing
• a cover for cylinder cover’s air inlet should be fitted as
illustrated.
These reduce the cooling air and prevent large amounts of
snow from being sucked into the engine.
IMPORTANT! If the temperature rises above -5°C or 0°C
respectively the machine MUST be restored to its normal set-
up. Otherwise there is a risk of overheating, which can cause
severe engine damage.
To Next Page
Loading...
