EasyManua.ls Logo

Jonsered LT16A - User Manual

Jonsered LT16A
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Instruction manual
Please read these instructions care-
fully and make sure you understand
them before using this machine.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen
sorgfältig durch und vergewissern Sie
sich, daß Sie diese verstehen, bevor
Sie die Maschine in Betrieb nehmen.
Manuel d’instructions
Merci de lire trés attentivement le
manuel d'instructions. Assurez-vous
d'avior tout compris avant d'utiliser ce
tracteur.
Manual de las instrucciones
Por favor lea cuidadosamente y
comprenda estas intrucciones antes
de usar esta maquina.
Manuale di istruzioni
Prima di utilizzare la macchina leggete
queste istruzioni con attenzione ed
accertatevi di averle comprese bene.
Instructieboekje
Lees deze instructies aandachtig en
zorg dat u ze begrijpt voordat u deze
machine gebruikt.
LT16A
Question and Answer IconNeed help?

Do you have a question about the Jonsered LT16A and is the answer not in the manual?

Jonsered LT16A Specifications

General IconGeneral
BrandJonsered
ModelLT16A
CategoryLawn Mower
LanguageEnglish

Summary

Safety Specifications

Safety Rules

Training

Instructions for proper use and familiarization with the equipment.

Preparation

Steps and precautions before operating the machine.

Operation

Guidelines and warnings for safe machine operation.

Maintenance and Storage

Assembly

Steering Wheel

Instructions for mounting the steering wheel assembly.

Extension Shaft

Details on installing the steering column extension shaft.

Seat

Seat Adjustment

Procedure for adjusting the seat position for user comfort.

Install Battery

Functional Description

Control Panel Layout

Overview of the tractor's control panel and component placement.

Key Controls Operation

Details operation of major controls like accelerator, brake, motion control, ignition, and parking brake.

Cutting Unit Controls

Explains operation of attachment clutch, quick lift/lower, and cutting height adjustment.

Free-wheel Control

Instructions for engaging and disengaging the free-wheel function.

Before starting

Filling Up

Procedure and safety precautions for refueling the engine.

Oil level

Checking Oil Level

Guide on how to check and maintain the engine's oil level.

Tire air pressure

Checking Tire Pressure

Instructions for checking and maintaining correct tire inflation.

Driving

Starting the Motor

Steps for starting the engine safely.

Cold and Warm Motor Starting

Specific procedures for starting the engine when cold or warm.

Cold Starting for Hydro

Transaxle Pump Fluid

Information on transaxle fluid and maintenance requirements.

Cutting tips

Cutting Tips

Advice for optimal mowing results and lawn care.

Switching off the engine

Switching Off the Engine

Procedure for safely stopping the engine and machine.

Maintenance, adjustment

Pre-Service Checks

Essential checks and safety measures before performing service.

Engine Hood

Instructions for removing and reinstalling the engine hood.

SERVICE RECORD

Blades

Blade Removal

Steps for safely removing and replacing mower blades.

Brakes

Brake Adjustment

Procedure for adjusting the brake system.

Dismantling of the cutting unit

Assembly of the cutting unit

Replacement of drive belt for cutting unit

Adjustment of the cutting unit

Travel Direction Adjustment

Adjusting the cutting unit for proper travel direction.

Side-to-Side Adjustment

Measuring and Adjusting Side Clearance

Procedure for measuring and adjusting deck side-to-side level.

TRANSAXLE MOTION CONTROL LEVER ADJUSTMENT

Motion Control Lever Adjustment

Adjusting the transaxle motion control lever for proper operation.

TRANSAXLE COOLING

Transaxle Pump Fluid

Information on transaxle fluid and maintenance requirements.

Fault Tracing

Engine Issues

Troubleshooting for engine starting, running, overheating, and performance problems.

Electrical System Problems

Diagnosis for battery and lighting system malfunctions.

Mechanical and Cutting Issues

Troubleshooting for vibration and uneven cutting results.

Storage

End of Season Procedures

Steps for preparing the tractor for storage at the end of the season.

Service Information

Details for ordering spare parts and warranty service.

Related product manuals