EasyManua.ls Logo

JOPIX Doris CB-27 - Keypad Operations

Default Icon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English - 30 -
Deleting memory channel:
Under memory channel mode, select the channel you want delete, press and hold
the corresponding [M1] ~ [M4] key until the storage channel number displayed on
the screen disappears and a “beep-beep” sounds, indicating that the channel has
been deleted.
KEYPAD OPERATION:
[MT/LOCK] key:
Keypad locks function.
1. Press and hold the [MT/LOCK] key for 2 seconds to turn on the keypad
lock function, the screen will display the “ ” icon.
2. Press and hold the [MT/LOCK] key for 2 seconds to turn off the keypad
lock function.
Note:
- When this function is on, only the [PTT] and [VOL/PUSH] switch knob is
valid.
[SQ/M1] key:
Squelch level selection.
Short press the [SQ/M1] key to display the current SQ level on the LCD. You can
select the desired SQ level by rotating the [VOL/PUSH] knob or by pressing the
[UP] / [DOWN] key on the microphone.
Available levels: 1 ~ 34 and OFF.
[VOX] key:
VOX function.
Short press the [VOX] key to turn on/off the voice control function.
[ASQ/M2] key:
Automatic squelch level selection.
Short press the [ASQ/M2] key to display the current ASQ level on the LCD. You
can select the desired ASQ level by rotating the [VOL/PUSH] knob or by pressing
the [UP] / [DOWN] keys on the microphone.
There are 1 ~ 9 levels to choose.