Jorvik JMT7 Electric Mountain Trike
14
The Seat
Make sure that the seat is tight enough so that you can’t twist
it out of alignment. Pull the seat clamp handle away from the
seat post and slide the seat up to down to adjust it. Move the
clamp handle inward toward the seat post so it is held tight by
the clamp.
This should require a fair amount of force to ensure the seat
post is held tight.
Turning the bolt clockwise will increase the clamping force and
counter clockwise will decrease the clamping force.
Make sure the seat is not set with the vertical maximum height
marks above the clamp.
How To Assemble This Tricycle
To Next Page
Loading...
