Why does my Jorvik Odin Bicycle run slowly in power mode?
- RRobert Brown IIIAug 1, 2025
If your Jorvik Bicycle runs slowly in ‘Power mode’, ensure the throttle is fully opened and verify that the battery is fully charged.
Why does my Jorvik Odin Bicycle run slowly in power mode?
If your Jorvik Bicycle runs slowly in ‘Power mode’, ensure the throttle is fully opened and verify that the battery is fully charged.
What to do if my Jorvik Bicycle doesn't work when switched on?
If your Jorvik Bicycle does not work when the switch is in the “ON” position, check that the battery and battery box seat are aligned correctly, and ensure the battery box is locked.
What to do if my Jorvik Odin doesn’t restart?
If your Jorvik Bicycle doesn’t restart after stopping, check whether the brakes are stuck.
Why is the Jorvik Bicycle charger indicator dim?
If the charger indicator is dimmed and doesn’t appear to be charging your Jorvik Bicycle correctly, check whether there is electricity to the charger.
Why is there a yellow light on my Jorvik Odin Bicycle charger?
If a yellow light is illuminated on the charger while charging your Jorvik Bicycle, check whether the plug end of the charger has been inserted properly.
Why is my Jorvik Bicycle running slowly in ‘Power mode’?
If your Jorvik Bicycle runs slowly in ‘Power mode’, make sure that the throttle is fully opened and the battery is fully charged.
How to fix a Jorvik Odin Bicycle that won't turn on?
If your Jorvik Bicycle does not work when switched on, verify that the battery and battery box seat are aligned and the battery box is locked. Also, check the fuse located inside the top of the battery box.
Guide on how to install the seat post and adjust its height securely.
Steps for correctly mounting the front wheel, ensuring brake alignment.
Instructions for attaching the handlebars to the frame using an Allen key.
Steps for assembling the front light and fender by securing screws.
Instructions for installing pedals and recommended torque specifications.
Explanation of the LCD display layout, icons, and indicators.
Guide on how to operate the meter and adjust basic settings.
Instructions for setting max speed, wheel diameter, and speed units (KM/H, MPH).
Procedure for selecting the correct battery voltage (36V or 48V).
Guidance on using the thumb throttle for motor assistance.
Information on the maximum weight capacity for the bike and rear basket.
Checks for wheel centering, spoke tension, and smooth rotation.
Ensuring rims are smooth and spokes have consistent tension.
Advice on tyre inflation, pressure, seating, and condition checks.
Ensuring handlebar grips are secure and the display is visible.
Checks for worn brakes, cables, and understanding wet weather impact.