JORVIK TRICYCLES
Page | 12
ERROR CODE INDICATOR
If there is something wrong with the electronic control system, the display will flash at 1
HZ and show the error code automatically. Different error codes is corresponding with
different fault information, please see the following Error code table for details.
ERROR CODE TABLE
The error code is corresponding with the fault definition
Error code definition
1 Current error or MOS damaged
2 Throttle error(Start detection)
3 Motor no phase position
4 Hall error
5 Brake error(Start detection)
6 Under voltage
7 Motor stalling
8 Communication controller receiving error
9 Communication display receiving error
To Next Page
Loading...
