Jorvik JMT9 Mid Drive Folding Electric Mountain Trike
9
How To Assemble This Tricycle
Handlebars
At the bottom of the stem lift up the
chrome safety clasp then open the quick
release lever. Then simply mount the
handlebar onto the top of the front fork
stem, tighten the bolt of stem centre by
using a 6mm Allen key making sure the
front fork is aligned to the wheel.
See Image 1 and 2
To adjust the handle bar height open
the quick release lever, adjust to desired
height then close again. (See Image 3)
To collapse or raise the handlebars, lift up
the chrome safety clasp then open the
quick release lever as shown in
Image 4, collapse the handlebars shown
in Image 5. To raise and lock into position
again reverse the same procedure as
shown in Image 6.
Image 3Image 2Image 1
Image 5 Image 6Image 4
To Next Page
Loading...
