jost JSK52DV - To Remove and Install the Lock Jaw

12
02
JSK38/05
27
28
4 Repair work
4.4
To remove and install the lock jaw
Remove the wearing ring (see 4.3).
27 Spring
 Release the spring (27).
02 Bolt
 Pull out the bolt (02).
During installation tighten the cap screw by hand and then tighten it a further 1.5 to 2 turns.
28 Lock jaw
Remove the lock jaw (28) as shown.
Before installing the lock jaw (28), check the wear on the lock jaw (28) (see 4.7).