10
4 Repair work
4.2
To remove and install the locking mechanism
04 Double tension spring
10 Pull handle
Release the double spring (04).
Remove locking mechanism assembly in turn and pull
the handle out in the direction indicated by the
arrow.
As you install the locking mechanism grease all the
moving parts. Adjust the locking mechanism as
described in
4.6.
03 Lock bar
.
04 Double tension spring
.
05 Bar bolt compl.
06 Fixing loop
.
07 Bolt compl.
08 Spring
.
09 Washer
.
10 Pull handle
.
To Next Page
