92478_UM_ SART_F 17
4.2
Using the 1m rope
Figure 4.2, Tron SART with 1m rope attached.
The 1m. rope is meant to hang the Tron SART inside a life raft. Any objects that the rope can be attached
to can be used. As long as the transponder is kept away from any metal objects, the performance will not
be notable degraded because of the canvas of the life raft.
4.3
Using the 1m pole
Figure 4.3, Tron SART with 1m optional pole attached.
The 1m pole can be used to extend the height of the Tron SART, inside or outside the life raft/boat.
Simply extend the attached pole to the full length (app. 1,15m from the top of the Tron SART). Make
sure that the rod is locked by pulling hard when it is fully extended. The rod can now be fastened or held
by a person. Make sure to hold the rod as vertical as possible when activating the Tron SART.
To Next Page
Loading...
Need help?
General
