11
The following actions are available with the use of remote
control according to the operation mode:
Buttons for
changing throttle
position
Buttons for changing the
preset temperature of
exhaust gases
Ignition Readout Change/Readout
Automatic Readout Change/Readout
Extinguish Readout Readout
Manual Change Readout
9.0 Regulator menu
Changes in regulator settings are made by a menu system.
Activating MENU is also performed by pushing or turning the
knob in the main window so as to select the MENU icon. Push
the knob according to the following diagram
Fig. 19 Activating regulator menu
After activating MENU, a screen with icons of the regulator
functions will be displayed:
Fig. 20 Regulator menu
In the center of the screen, the active icon will be selected; it is
a “set temperature” icon. Now you can switch between menu
positions by turning the knob. In the main menu, they will be:
Fig. 21 Menu modes of the main regulator
Fig. 22 Menu structure
To Next Page
Loading...
Need help?
General