JP Selecta UV 2005 - Page 43

INSTRUCTION MANUAL CODE 80243 REV A January/11 (It can be modied without notice) Page: 43
J.P. SELECTA s.a. Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España Tel 34 93 770 08 77 Fax 34 93 770 23 62
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
Set Parameters
Press [SET] in the coefcient method pre-testing screen, and 3 parameters should
be set before testing. (Fig. 24)
Set Coefcient K
Move the cursor on Coefcient K by pressing [»] and [«], followed by [ENTER].
(Fig. 25)
Input the new value of K by pressing the numeric keypad followed by [ENTER], and
it will return to the setting screen.
Note:
The range of K is 0 - 9999, other value is invalid.
Set Coefcient B
Move the cursor on Coefcient B by pressing [»] and [«], followed by [ENTER].
(Fig. 26)
Input the new value of B by pressing the numeric keypad and press [ENTER], and
it will return the setting screen.
Note:
The range of B is between -9999 - 9999, other value is invalid.
Set Concentration Unit
Move the cursor onto Conc. Unit by pressing [»] and [«], and then press [ENTER].
Figure 26
Figure 25
Figure 24