To Next PageTo Next Page
Need help?Do you have a question about the JP Selecta UV 2005 and is the answer not in the manual?
General| Photometric Accuracy | ±0.5%T |
|---|---|
| Display | LCD |
| Type | UV Vis Spectrophotometer |
| Lamp Type | Deuterium and Halogen |
| Power Supply | 220V/50Hz |
Lists items included in the package.
Lists additional accessories available for the unit.
Explains various safety icons and their meanings.
Specifies the required qualifications for operating the equipment.
Details the intended applications and environments for the equipment.
Warns against unauthorized modifications to the equipment.
Provides guidelines for placing the spectrophotometer.
Details how to connect the equipment to a power source.
Explains the function of each key on the control panel.
Guides the user through the initial power-on and self-testing process.
Outlines the steps for performing basic measurements.
Describes how to perform sample analysis using the basic mode.
Explains methods for quantitative analysis using standard curves or coefficients.
Details the procedures for kinetic analysis of samples.
Instructions for setting the Deuterium lamp on or off.
Instructions for setting the Tungsten lamp on or off.
Configuration options for the printer settings.
Procedure for setting the instrument's date and time.
Procedure to obtain dark current readings for accurate measurements.
Instructions for resetting the wavelength calibration.
Management of lamp life, including display and reset functions.
Procedure to load default parameters for the instrument.
Instructions for changing the lamp and its wavelength setting.
Displays detailed information about the instrument's version.
Detailed steps for replacing the Tungsten-halogen and Deuterium lamps.
Steps for replacing the internal battery of the instrument.
