Volume adjustment
• Nudge volume up/down button to the “+ or -” symbols to adjust the listening volume.
There is a raised notch that makes it easy to nd.
Note that high listening volume settings may cause echo or other noise on the line, for one or both
parties on the line. Try to lower the listening volume if this is the case.
Important! – High listening volume settings may be harmful to your hearing.
Mute On/O
• When on a call, press and release the mute button and “Mute On” is heard in the speaker.
• Press again to resume the call and “Mute O” is heard in speaker.
IMPORTANT: Volume Settings
• Set the headset earphone volume on your PC to maximum.
• Set the microphone volume within your PC settings to a mid range volume.
• Make a test call to regulate the microphone sound on your PC settings and ne tune the speaker
sound using the speaker volume switch on your headset.
• There is a small notch on each volume button that makes them easy to nd.
Microphone Boom Volume Control
Down Up
Mute
Pairing / Mute
and Speaker Volume
Hook On/O
Answer / End
a call
DND Light
To Next Page
Loading...
