EasyManua.ls Logo

JPL Element-BT500D - Positioning the Microphone; Headset Charging

JPL Element-BT500D
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Positioning the Microphone
30mm
The microphone boom arm is exible, so you can
gently bend the boom and position it to suit the
curve of your face.
The ideal position for the microphone
is at the corner of the mouth, not in front of it,
but approximately 30mm (2 nger width)
away from the mouth.
Ensure that the side of the microphone is pointed
towards your mouth.
Holding the headset, rotate the headband to bring
the boom close to your cheek.
Headset Charging
Micro USB Port
for charging
headset
If the headset has been out of use for some item, it may take
up to 4 hours to charge it fully.
Normal charging time is 2-3 hours.
Low battery is indicated by the ashing red LED on the headset.
The USB cable can be plugged
into either a computer or a
USB wall charger

Related product manuals