JR PCM9X II - Step #7 Turning off the Spoiler Stick Trim; Step #8 Establishing Flight Modes

www.modelflight.com.au – World’s best source of JR products
Step #7
T
u
r
nin
g
Of
f
the Spoile
r
Stick
T
rim
In the SYSTEM M. list, rotate the Selector until TRIM
STEP is highlighted. Depress the Selector to access
the TRIM STEP menu. Rotate the Selector to highligh
t
SPOI and press the Selector to access the spoiler tri
m
value. Rotate the Selector until a 0% is shown. This wil
l
t
urn off the s
p
oiler trim,
p
reventin
g
an
y
unwanted
interaction
w
ith the spoiler trim and the spoiler stic
k
.
Depressing
the Selector will store the desired 0% value i
n
the model memory. Press the LIST button to return to th
e
System Mode screen.
Step #8 Es
t
ablishing Flight Modes
In the SYSTEM M. list, rotate the Selector until De v i c .
SE L is highlighted. Depress the Selector to access the
Device Select menu. Initially we are going to activate
three of the available five flight modes (Launch, Cruise
and Land). Rotate the Selector to highlight L A UN and
press the Selector to access the available switches that
the flight mode can be assigned to. For our purpose,
assign the L A UN flight mode to A UX4 SW (left 3-
position switch). Later you can change the flight mode
to the position that best suit your needs. Rotate the
Selector until A UX4 SW is highlighted and press the
Selector to store the desired left 3-position switch.
Press the LIST button to return to the System Mode
screen.
Sail
p
lane P
r
o
g
r
ammin
g
Guide 6