JRC JCY-1900 - Page 73

Chapter 4 Operation Method
37
5. If [Latest data] is selected, change the date and time of recorded data that would like to copy
by the button shown in Table 4-7.
In Figure 4-24, selects the recorded data for six hours from 23:00 on April 1, 2014 to 5:00 on April
2, 2014.
Table 4-7 Button in the DATA SELECT screen
Button Function
Changes the date of recorded data that would like to copy.
[The center of cursor] minus [one day].
Changes the date of recorded data that would like to copy.
[The center of cursor] plus [one day].
Changes hour the hour of recorded data that would like to copy.
[The center of cursor] minus [one hour].
Changes hour the date of recorded data that would like to copy.
[The center of cursor] plus [one hour].
Changes the period of copy.
[The period of copy] minus [one hour].
Displays the period of copy.
The settable period of copy is 1 to 6 hours by 1 hour unit.
Changes the period of copy.
[The period of copy] plus [one hour].
Figure 4-24 Setting the date and time of recorded data
The date and time of recorded data that would like to copy