- 3 -
Battery pack
To attach the battery pack:
Slide the battery pack on the back of the transceiver in the direction of the arrow (
○
1 ), then lock it
with the battery release button.
Slide the battery pack until the battery release button makes a 'click' sound.
To release the battery pack:
Push the battery release button in the direction of the arrow
(
○
2 ) as shown right. The battery pack is then released.
NEVER release or attach the battery pack in a hazardous
area. This may result cause an explosion or fire.
NEVER release or attach the battery pack when the transceiver
is wet or soiled. This may result water or dust getting into the
transceiver/battery pack and may result in the transceiver being damaged.
Jack cover
Attach the jack cover when the optional speaker-microphone is not used.
To attach the jack cover: To detach the jack cover:
○
1 Insert the jack cover
into the [SP MIC]
○
3 Unscrew the screw
connector. with a phillips
screwdriver.
○
2 Tighten the screw.
○
4 Detac h the jack
cover for the
speaker/microphone
connection.
Belt clip
Attach the belt clip to the back
of the transceiver with the
supplied screws.
Carrying strap
Attach the Carrying strap to the back of the transceiver with
the supplied screws.
①
②
電池パック
電池パック取り外しボタン
Battery pack
Battery release button
①
②
③
④
付属
ス
MB-79
Supplied screws
NOTE:
In replacing a battery pack.
Belt clip and carrying strap are
removed from and old battery
pack, and please reattach to a
new battery pack. Neither belt
clip nor carrying strap is
attached to a new battery
pack.
To Next Page
Loading...
