4-20
2) Doppler Log
【】Choice
Main menu
Explanation
Default
Sub-menu1
Sub-menu2
Sub-menu3
1> DISPLAY
LCD
CONTRAST
Adjust the LCD contrast.
【 1(dark)～13(light) 】
7
DIMMR MAXIMUM
Adjust the LCD dimmer.
Brightness can be changed by using [DIM] key.
・Enter the hihest value in "MAXIMUM" and lowest
value in "MINIMUM".
【 2(dark)～13(bright) 】
11
DIMMER TYPCAL 7
DIMMER MINIMUM 3
CLICK SOUND
Turn on/off a key-operation click sound.
オン
DISPLAY SELECTION The display assigned to the [DISP] key is registered
・
Up to six screens can be registered.
DISPLAY 1,2,3,4,5,6
Select numerical/ analogue (graphic)/graph screens.
【 Segmentation1,2,3,4/ Special/ Graphic/ OFF】
Refer
to 3.1
DISPLAY
You can select display contents
【 Refer to next section 】
Refer
to 3.1
（DISPLAY MODE）
Only the integer section or a decimal section of
some item that is selected on a 1-segmentation
customized screen can be expanded.
【 Normal, Special1, Special2, Auro range 】
Normal
AUTO SCREEN Switch a screen automaticaly. OFF
SOUND
Emits a buzzer sound when the screen is switched.
【 Sound1, Sound2, OFF 】
OFF
TIME
Sets a screen switching time in auto screen
function.
【 1 ~10 seconds 】
1
BACK LIGHT
Select a LCD backlight color.
【 White, Orange 】
White
2> SYSTEM
UNIT Selecting the units.
SPEED
The unit of Speed
【 kn, m/s 】
kn
SMOOTHUNG
STW Sets a smoothing time of speed. 10
SPEED
Select a vessel speed to be displayed.
【ＳＴＷ、SOG(GPS】
STW:Water speed by Doppler Log
SOG(GPS):Ground speed by GPS
STW
3> LANG.
LANG.
Set the display language.
. 【 English, Japanese, Italian, German,Norwegian,
Spanish, French, Vietnamese,Indonesian 】
English
To Next Page
Loading...
