To Next PageTo Next Page
Need help?Do you have a question about the JRC JAN-7201 and is the answer not in the manual?
General| Display | Color LCD |
|---|---|
| Radar Type | X-band |
| Power Supply | 24 V DC |
| IMO Compliance | Yes |
| Frequency Band | X-band |
| IP Rating | IPX6 |
| Frequency | 9410 MHz |
| Range | 0.125 to 72 NM |
| Antenna Type | Slotted Waveguide |
| Range Scales | 0.125 to 72 NM |
| Antenna Length | 6.5 feet |
Accesses the radar adjustment dialog, comprising classification and edit panes.
Covers basic radar adjustments including bearing and distance calibration.
Details the process for adjusting the radar antenna height setting.
Explains Main Bang Suppression adjustment for suppressing main bang images.
Shows how to access the installation dialog with classification and edit/result panes.
Covers setting the Consistent Common Reference Point (CCRP) on own ship.
Details serial port settings, including diagnosis lamps and allocation.
Explains how to modify communication settings for serial ports via the Detail dialog.
Accesses the dialog for setting own ship's parameters.
Details items like Ship's Name, Length, Beam, and speed limits.
Accesses the dialog for verifying and initializing the automatic sailing system.
Covers setting parameters like Reach Offset and Time/Distance to WPT.
Accesses the dialog for setting the AIS password.
Details how to set the AIS password, up to 32 numeric characters.
Accesses the sensor dialog for alert set points and GPS linkage.
Explains checking the synchronisation of depth alarm limit for alerts.
Describes enabling the GPS switching linkage function for sensor sources.
Accesses the dialog to change route sharing methods.
Allows selection between GPS Shared Route and Route Plan Exchange.
Accesses the dialog for managing new/old route sharing and data transmission.
Enables switching settings for new/old route sharing and data transmission.
Accesses the dialog to enable/disable route plan exchange.
Covers setting address, timeout, SFI, and transmission group for exchange.
Accesses the maintenance dialog with two-level classification panes.
Details managing storage, showing drive and file information.
Describes the playback controller interface, including simplified/full display and sections.
Covers selecting navigation record data and sorting the playback list.
Explains starting, pausing, and stopping the playback of logbook data.
Details how to change the playback speed using the selection box and buttons.
Describes the procedure for closing the playback dialog and ending playback mode.
Explains how to select and copy navigation record data to an output destination.
Lists functions that are restricted or disabled when in playback mode.
Details maintenance functions accessible via the menu system.
Covers basic maintenance procedures like cleaning the equipment.
Focuses on maintenance specific to hardware units like display and trackball.
Describes procedures for checking equipment performance regularly.
Lists parts requiring periodic replacement and their expected life.
Provides instructions for updating the equipment's software.
Explains the process for updating the product's firmware.
Details how to update the product's help data for RADAR, ECDIS, and Conning.
Guides on confirming maintenance information and its screen details.
Covers procedures for backing up and restoring system data.
Details the process for restoring system images and C-MAP settings.
Covers methods of detecting failures, including alerts and error messages.
Provides information on repair circuit blocks for different unit locations.
Guides users through common symptoms, causes, and actions for troubleshooting.
Information on service parts, repair requests, and maintenance recommendations.
Details how to extend equipment functions by importing license information.
Lists alarm messages, their subjects, explanations, and categories.
Details warning messages, their subjects, explanations, and categories.
Lists caution messages, their subjects, explanations, and categories.
Provides a visual reference for alert icons and their functional outlines.
Lists maintenance information messages and corresponding advice.
Provides a comprehensive list of menus and dialog items by target menu.
Details menu items for planning and managing routes.
Lists menu items for monitoring routes and voyage calculations.
Details menu options for monitoring anchor status.
Lists menu options for the automatic sailing system.
Covers menu items for manual chart updates and chart display settings.
Details menu options for creating, editing, and managing user charts.
Lists menu items for accessing and managing logbook data.
Covers menu options for TT/AIS data display and management.
Details menu items for tools like range rings, EBL, VRM, and PI.
Covers menu options for adjusting display settings like view modes and own ship vectors.
Lists menu options for managing alerts and safety contour settings.
Details menu options for signal process, association, and filter settings.
Covers menu options for importing/updating chart licenses and data.
Lists menu options for date/time, system information, and operating time.
Provides access to adjustment, installation, and data output menus for service personnel.
Lists context menus displayed by right-clicking objects on ECDIS screens.
Details context menus for No Object on ECDIS (S57/C-MAP) and ARCS screens.
Lists context menus for Sleeping, Activated, and Numeric AIS targets.
Details context menus for Internal and External TT information display.
Lists context menu options for NAVTEX information readout.
Details context menus for Event, Information, Current marks, and Clearing lines.
Lists context menus for Symbol, Line, Area, Text, Fan, Arrow creation.
Details context menus for manual updates of Symbols, Lines, and Areas.
Lists context menus for manual updates of ARCS and C-MAP objects.
Details context menu options for viewing and editing monitored routes.
Lists context menu options for planned tracks like Add WPT and Copy Route.
Details context menus for dragging anchor monitoring circle and polygon.
Provides a table of geodetic data abbreviations and their display information.
Contains lists of terminologies, units, and abbreviations used in the system.
An alphabetical list of abbreviations with their corresponding terms.
Lists icon buttons used for user charts, categorized by Mariner's Mark/Line, Symbol, Line, Area.
Provides icon button lists for manual chart updates (S-57).
Details symbols used in manual chart updates with object names and display examples.
Details line types used in manual chart updates with object names and display examples.
Details area shapes used in manual chart updates with object names and display examples.
Specifies input rules for ENC object attributes like Signal Group and Date End.
Defines the format for encoding signal groups of lights.
Defines the format for encoding time intervals of light and eclipse.
Describes encoding for reference station ID, water level, and flow direction.
Specifies format for encoding dates, times, and heights of tides.
Defines the format for the designated call-sign of a radio station.
Specifies the descriptive name for a 'new object' feature object class.
Encodes the individual name of an object in the specified national language.
