JRC JMA-9922-9XA User Manual

oaooaaaaaaaaaaaaaaaaaaoaaaaaatooaaaaaao
Display Processed Videos
Unnecessary
noise
will
be reduced to highlight targets.
Attention
ln
watching
a
radar
beacon
mark,
SART signal
or a fast moving target on the
radar display,
set
the
system
to : PROCESS
OFF
(Processed
Video
OFF).
It
is most
suitable
to
use
this function in the TM mode.
In using this function in the RM mode,
use
it in the NORTH
UP or
COURSE UP
mode. In using the function in the HEAD UP mode, the
video
may
be
bluned.
Glicking "PROC'on
the screen will change the
setting.
O
When sefting
from
the menu:
ctick
IMENUI
.
The
Main Menu will
appear.
Click
the setting
section
of
"3.PROCESS".
|3.PROCESS|will
be selected
and the
pull-down
menu
will appear.
3
Click a setting from 1 to 4.
3-1 When
"2.PROCl"
is selected.
FFnOCil
witt be set and the targets moving
at high
speeds
will
be selected.
The
targets moving at low speeds will be
darkened.
This
function is recommendable on the radar
ranges
of 1.5 NM or less.
MAIN
MENU
1.IR
lorr
EoH
2.TGT
ENH
Eorr
loN
3.
4.FU
5,EBL1
6.EBL2
7.
8.
9.
o.
ElcerureR
norrser
DATA
OFF
SUBl
MENU
DEGAUSS
EXIT
3-2
When
"3.PROC2"
is selected.
lSPRod2lwill
be set.
This
processing
speed
is in a range
between
PROC1
and PROC3.
3-3 When"4.PROC3"
is
selected.
FpnOCglwilt
be set and the targets moving at low
speeds will
be selected.
The targets moving at high speeds will be darkened.
This function is recommendable on the
radar ranges
of 3 NM
or
more.
3-67

JRC JMA-9922-9XA Specifications

General

Brand	JRC
Model	JMA-9922-9XA
Category	Marine Radar
Language	English