JRC JMA-9922-9XA User Manual

o aaaooooaaa
aoaaaaoaoaaaaaaaooooaaaaa
aoa
1-5 AIS
Tarqet
Deactivation
When an
AIS
target
is deactivated,
the
vector and
the
heading are
deleted as a
sleepingx2
target.
(Method-1
: With
the software
button
on lhe
screen)
1.
put
the arrow
cursor on
the
lDAetr
button
and
click the track
ball section
left
button.
Gursor
mode'AlS
DEACfl is displayed
at the
upper
right side on the screen.
2. Put the
cross
cursor
"+"
on the
target
to be deactivated
and
press
the track ball
section
left button
.
The
selected
AIS target
is deactivated.
(Method-2
:
With the menu
operation)
1. Left-click IMENUI
on
the screen.
Main menu
opens.
2. Left-click
3.
Left-click
4. Left-click
5. Left-click
"ON" of
"3.AlS
DEACTIVATE
.
Cursor
mode
"AlS
DEACT"
is displayed
at
the
upper
right side on the
screen.
6.
Put the cross
cursor
"+"
on
the target
to be deactivated
and
press
the
track ball section
left button
. The selected
AIS target
is deactivated.
Note
This operation
is only
available
for an activated
target.
Refer
to
"1.9
Definitions
of AIS
Target
Symbols"
about
the sleeping
target.
A-32
FuBl
Mil-Ul.
SUBI
menu opens.
FRPA/AIS
ARPfuAIS
menu opens.
Frs
sErri[d.
AIS SETTING
menu
opens.

JRC JMA-9922-9XA Specifications

General

Brand	JRC
Model	JMA-9922-9XA
Category	Marine Radar
Language	English