JRC JMR-5406-X - Operation Common to Target Tracking and AIS; Setting up Vectors; Setting up the Vector Mode; Setting up the Vector Length

5-1 Section 5 Operation Common to Target Tracking and AIS
1
2
3
4
5
5
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
Section 5 Operation Common to
Target Tracking and AIS
5.1 Setting Up Vectors
5.1.1 Setting up the vector mode
1 Click on the Vector/Past POSN true/relative selector button
in the other ship information window.
Each click switches track display mode between [T] and [R].
5.1.2 Setting up the vector length
The Vector Length is set in min in the range from 1 min to 120 min.
1 Click on the Vector Length input box in the other ship information window.
2 Enter the Vector Length.
Vector Length input box
Vector/Past POSN true/relative selector button