JRC JMR-9225-6X - Displaying Radar Trail

2.14 Displaying Radar Trail
2.14.1 Changing the Trail Length
1 Click the Radar Trail Length Changeover button.
2 Select a radar trail length.
2.14.2 Erasing a Radar Trail
1 Click the "CLR" (Clear Radar Trails) button.
A confirmation dialog box appears.
2 Click the "OK" button.
All the trails are erased and drawing of trails start from the initial state.
Radar Trail Length
Changeover Button
"CLR" (Clear Radar
Trails) Button
17