2.2 Finishing and Stopping Operation
1 Click the standby/transmission changeover button of the radar signal information.
Radar transmission stops and the rotation of the radar antenna stops.
The display of the standby/transmission changeover button is switched from "Transmit" to
"Standby".
2 Press the Power button on the operation unit.
The power to this equipment stays off.
2.3 Adjusting Screen Brightness
Adjust the screen to an easy to view state by operating the "MULTI" dial.
2.3.1 When "DISP Brightness" is being displayed
in the Key Assignment Indication Area (key
allocation display area)
1 Adjust the screen brightness by rotating the "MULTI" dial to the right or left.
The entire screen becomes brighter when the dial is rotated to the right.
The entire screen becomes darker when the dial is rotated to the left.
Key Assignment Indication Area
(key allocation display area)
4
To Next Page
Loading...
