This manual must be retained for future reference.
A copy of this manual and the Declaration of Conformity for the product can be found on the product page of
JSP Ltd’s website: www.jspsafety.com
GB
CON
TENTS
Applications 4
Unpacking & Inspection 4
Storage 5
Before Use 5
Charging the Battery 5
Battery & Airow Check 6
General Use & Warning System 6
Using PowerCap
®
Innity
®
7
Donning 7
Warning Scenario Table 8
Dofng 8
Maintenance 8
Filters 8
Removing & Replacing Filters 9
Removing & Replacing Pre-Filters 9
Removing & Replacing the Visor 10
Removing & Replacing the Visor Cover 10
Removing & Replacing the Drive Unit & Visor Carrier Assembly 11
Removing & Replacing the Face-Seal Skirt 11
Removing & Replacing the Harness Strap 12
Safety Precautions 12
Additional Industrial Safety Helmet Instructions 13
Additional Industrial Eye Protection Instructions 13
Markings 13
Warranty 14
Battery Information 14
Cleaning 15
Accessories 15
Replacement Parts 16
If further assistance is required, please scan the corresponsing QR code next to
each section heading to view the related instruction video.
3