JUGS BP 1 User Manual

22
Transporting
1. Using the Vertical T-Handle, lock the rotating plate in “pop fly to
catchers” position (vertically upward).
2. Make sure the Horizontal T-Handle engages the indentation of the
base shaft. This is done by lining up the Horizontal T-Handle with
the red dot on the base casting, and hand-tightening the T-Handle.
3. Lower JUGS to a horizontal position, with the feed chute facing
upward.
4. Slightly loosen the base T-Handle that secures the legs.
5. Grasp two legs, and twist them towards your sides.
6. Tighten the base T-Handle.
7. Grasp and lift the two legs. Roll JUGS BP®1 as you would a
wheelbarrow.

JUGS BP 1 Specifications

General

Brand	JUGS
Model	BP 1
Category	Sports & Outdoors
Language	English