• Carefully lift machine from carton and place on level surface.
• Make sure you have all the parts (See Figures 3). If any parts are missing,
do not operate the machine until the missing parts are replaced. Failure
to do so could result in possible serious personal injury.
• Do not discard the packing materials until you have carefully inspected
the machine, identified all the parts, and satisfactorily operated the
machine.
NOTE: If any parts are damaged or missing, do not attempt to plug in the
power cord and turn on switch until the damaged or missing parts are
obtained and are installed correctly.
11
WARNING:
To prevent accidental starting or electrical shock that could
cause possible serious injury, assemble all parts to your
machine before connecting it to the power supply. The
pitching machine should never be connected to a power
supply when you are assembling parts, making adjustments,
cleaning, servicing, or when not in use.
Unpacking
Assembly
JUGS is shipped with the base secured tightly to the “top” of the machine.
1. Separate the “top” from the base casting.
a. Loosen the Horizontal T-Handle.
b. Grasp the lifting handle and pull the “top” off the base.
This can be done very simply with one person holding the “top”
and a second person holding the base casting.
To Next Page
Loading...
Need help?
General
