SAVE THIS MANUAL. Refer to it often and use it to instruct other users. Do
not loan your pitching machine to anyone who has not been instructed in
its use. If you do loan your machine, be sure this manual goes with it.
WARNING: Do not allow your familiarity with the machine to cause
you to be careless. Remember that a careless fraction of a
second is enough time to inflict severe injury to yourself
or others.
8
Grounding Instructions
This product must be grounded. If it should malfunction or break down,
grounding provides a path of least resistance for electric current to reduce
the risk of electric shock. This product is equipped with a cord having an
equipment-grounding conductor and grounding plug. The plug must be
connected to an appropriate GFCI outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
Do not modify the plug provided. If it will not fit the outlet, have the
proper outlet installed by a qualified electrician. Improper connection of
the equipment-grounding conductor can result in a risk of electric shock.
The conductor with insulation having an outer surface that is green with
or without yellow stripes is the equipment grounding conductor. If repair
or replacement of the electric cord or plug is necessary, do not connect the
equipment-grounding conductor to a live terminal.
Check with a qualified electrician or service personnel if the grounding
instructions are not completely understood, or if in doubt as to whether
the pitching machine is properly grounded.
Extension Cords
Use only 3-wire 16 AWG or larger grounding type extension cords that
have 3-prong grounding plugs and 3-pole receptacles that accept the
machine’s plug. When using the machine at a considerable distance from
a power source, use an extension cord heavy enough to carry the current
that the machine will draw (See recommended cord gauge notice inside
front cover.) An undersized extension cord will cause a drop in line voltage,
resulting in a loss of power and causing the motor to overheat. Only round
jacketed cords listed by Underwriter’s Laboratories (UL) should be used.
Electrical
To Next Page
Loading...
Need help?
General
