DLU-5494N-7/CP-560 (June, 2001) 1/2
DDL-5494N-7/CP-560
1-needle, Bottom & Variable Top-feed, Lockstitch Machine
with an Automatic Thread Trimmer and Programmable Shirring
Control Device
SPECIFICATIONS
● The machine enables even inexperienced operators to perform
shirring operation smoothly and easily.
● The microcomputer-controlled shirring mechanism allows even
inexperienced operators to carry out shirring operations skillfully,
producing high-quality products with consistency. While shirring,
an operator can enter a program through the use of the teaching
function, thereby duplicating a high-quality shirring operation by
performed program.
DLU-5494N-7/CP-560
DLU-5494N-7/CP-560
4,000rpm (normal 3,500rpm)
5mm (normal feed), 3mm (reverse feed)
8mm
(top-feed amount varies depending on the type of gauge)
30.7mm
By hand: 5.5mm, By knee: 13mm
DB×1 (#14), For JE: 134 (Nm90)
Automatic-lubricating full-rotary hook
Automatic
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
Provided as standard
Single-phase 100〜120V, 200〜240V, 3-phase 200〜240V
Power rating 400VA
85kg
Model name
Max. sewing speed
Max. stitch length
Max. top-feed amount
Needle bar stroke
Lift of the presser foot
Needle(at the time of delivery)
Hook
Lubrication
Lubricating oil
Automatic reverse feed function
Power requirement
Power consumption
Total weight
Targeted industrial applications
Men's and ladies' suits
Blazer coats
Coats
Blousons
Slacks
Skirts
Men's shirts
Blouses
Dresses
One-piece dresses
Sportswear
Sweaters
Others
Processes
1) Runstitching process
Runstitch front edge, join shoulder, sew center of back, seam side, set sleeve to armhole, etc.
2) Topstitching process
Topstitch front edge, topstitch sleeve cuff, topstitch collar, topstitch waistband, etc.
3) Gathering process
Attach yoke, attach cuff, join top and bottom, etc.
4) Sewing process with an attachment used in combination with the machine
Hem bottom, piping, binding, etc.
5) Others
Zipper-attachment process, blind-stitching process, sewing processes in which different
materials are used in combination, etc.
TARGETED INDUSTRIAL APPLICATIONS AND PROCESSES
To Next Page
Loading...
Need help?
General
