Need help?Do you have a question about the JUKI DDL-900A-S and is the answer not in the manual?
General| Max Stitch Length | 5 mm |
|---|---|
| Needle Type | DB x 1 |
| Needle Bar Stroke | 30.7 mm |
| Presser Foot Lift (Manual) | 5.5 mm |
| Presser Foot Lift (Knee) | 13 mm |
| Lubrication | Automatic |
| Bobbin | Metal Bobbin |
| Type | Lockstitch Sewing Machine |
| Stitch Type | Single Needle Lockstitch |
| Max Sewing Speed | 5000 stitches per minute |
| Needle Size | #9-#18 |
| Hook | Full rotary hook |
| Lubricating Oil | JUKI New Defrix Oil No. 1 or equivalent |
| Motor Type | AC Servo Motor |
| Power Consumption | 550W |
Details application, speed, stitch length, needle, oil, and noise specifications.
Guide for physically setting up the sewing machine head on the table, including safety.
Procedure for installing the pedal sensor and power switch.
Instructions for connecting the various cables and connectors to the control box.
Detailed steps for winding thread onto the bobbin correctly.
Instructions on proper lubrication of the sewing machine and checking oil levels.
How to adjust needle and bobbin thread tension and take-up spring settings.
Basic steps for operating the sewing machine, including power and pedal usage.
A comprehensive list of all available function settings, their ranges, and defaults.
Procedure for automatically compensating the pedal sensor's neutral point.
Procedure for adjusting the machine head angle for proper alignment.
How to check and interpret error codes displayed by the machine.
Detailed list of error codes, their expected causes, and items to check.
To Next Page
