＊
Needle up/down correction, one-stitch correction,
reverse-stitch correction, auto-lifter, thread trimming,
and the cancellation of one cycle of repetitive stitching.
This device can be installed on the back of the face plate.
It is very convenient for frequent use.
※The maximum sewing speed is 4,000 sti/min or less in cases where the maximum stitch length is 3.5 mm or more.
SPECIFICATIONS
Application
Max. sewing speed
Max. stitch length
Needle bar stroke
Lift of the presser foot
Needle (at the time of delivery)
Hook
Lubrication
Lubricating oil
Distance from needle to machine arm
Size of bed
Bobbin thread winder
Micro-lifter screw
Machine head drive
Automatic reverse feed function
Power requirement/Power consumption
Total weight
4.5mm
※
33mm
By hand: 5.5mm, By knee: 15mm(max.), Auto: 10mm
Automatic-lubricating full-rotary hook
Minute-quantity lubrication to needle bar and hook
JUKI New Defrix Oil NO.1 (equivalent to ISO VG7)
300mm
517mm×178mm
Built-in the machine head
Provided as standard
Compact AC servomotor that is directly connected to the main shaft (direct-drive system)
Provided as standard (built-in solenoid type)
Single-phase 100〜120V, 200〜240V, 3-phase 200〜240V /310VA
83.5kg
For heavy weight materials
4,000sti/min
DB×1 (#21) #20〜#23
For JE:134 (Nm130) Nm120〜Nm160
For light- to medium-weight materials
5,000sit/min
DB×1 (#11) #9〜#18
For JE:134 (Nm90) Nm65〜Nm110
DLN-9010A-SS DLN-9010A-SH
Model name
＊sti/min stands for Stitches per Minute.
●Auto-lifter
AK118 (pedal-driven)
●Optional switch (Part No.: 400-00380)
Various functions
＊
can be controlled through
manual switches, which are effective when
operating the machine in a standing position.
●Micro-lifter (asm.) (Part No.: 236-11056)
With its full array of options, the machine further increases productivity.
OPTIONS
WHEN YOU PLACE ORDERS
Please note when placing orders, that the model name should be written as follows:
To order, please contact your nearest JUKI distributor.
Single-phase 100〜120V
Power supply
S
3-phase 200〜240V D
Single-phase 200〜240V (for General Export) K
Single-phase 200〜240V (for CE) N
Single-phase 200〜240V (for China) U
Code
Not provided
Device and
attachment
Auto-lifter
(pedal-driven)
AK118
Code
Standard S
Machine
head type
Code
Machine head
Control box
CP18A
CP180A
Operation Panel
DLN9010AS
For light- to
medium-weight
materials
Application
S
For sewing
with low presser
foot pressure
B
H
Code
For heavy-weight
materials
Not provided
Wiper
Wiper and automatic
reverse feed function
0B
WB
Code
Provided
Automatic reverse
feed function
Provided
Provided
SC920A
SEWING MACHINERY BUSINESS UNIT
JANUARY, 2013 Printed in Japan(C)
2-11-1, TSURUMAKI, TAMA-SHI,
TOKYO
206-8551, JAPAN
PHONE :
(
81
)
42-357-2254
FAX :
(
81
)
42-357-2274
http://www.juki.com
✽
Specifications and appearance are subject to change without prior notice for improvement.
✽
Read the instruction manual before putting the machine into service to ensure safety.
Juki Corporation operates an environmental management system
to promote and conduct the following as the company engages in
the research, development, design, sales, distribution,and
maintenance of industrial sewing machines, household sewing
machines, industrial robots, etc., and in the provision of sales and
maintenance services for data entry systems:
(1) The development of products and engineering processes
that are safe to the environment
(2) Green procurement and green purchasing
(3)
Energy conservation (reduction in carbon-dioxide emissions)
(4) Resource saving (reduction of papers purchased, etc.)
(5) Reduction and recycling of waste
(6) Improvement of logistics efficiency (modal shift and
improvement of packaging, packing, etc.)
To Previous Page
Loading...
Need help?
General
