49
1) Calling the work break time 1 setting screen
In the state where the work break time 1 is
selected on the production parameter setting
screen, press EDIT key
.
The work break time 1 setting screen is displayed
A
.
2) Setting the starting time of work break
Press ITEM SELECT key
to display the
starting time of work break hour
B
(minute
C
) in
the reverse video.
Enter the set value for the work break hour
B
(minute
C
) by pressing DATA CHANGE key
.
(4) Setting the work break time
3) Setting the closing time of work break
Press ITEM SELECT key
to display the closing hour
D
(minute
E
) of work break in the reverse
video. Change the closing hour
D
(minute
E
) of work hours by pressing DATA CHANGE key
.
4) Determine the set values of work break
The set values are determined by pressing EDIT key
. Then, the screen returns to the produc-
tion parameter setting screen. If there are other work breaks, carry out setting of the work break 2 and
work break 3 by selecting them on the production parameter screen.
Set the work break time that is excluded from the calculation of the progress rate for the production support
function.
As many as three work break times can be set.
C DA B E
To Next Page
Loading...
