LZ-2290A-DS-7-WB
The machine comes with a completely non-lubricated head to
prevent oil stains on sewing products.
Extensive product lineup for supporting many different processes
The knife-sliding method employed by the thread
trimmer guarantees that the thread is cut regardless of
the needle throw position.
The knife unit is installed
under the bed slide to offer
easier maintenance.
The non-lubricated head will never scatter oil, promising cleanly
finished sewing products free from oil stains.
In addition, the machine and table will not be stained with oil
during the gauge changing or maintenance on the machine such
as cleaning.
The machine offers a service speed of as high as 4,000sti/min for
zigzag stitching. With this speed, the machine can be effectively
used in various zigzag stitching processes.
The newly developed special-race plastic hook offers increased
durability and upgraded sewing capabilities. It responds
beautifully to various types of thread. The hook helps the
machine produce consistent high-quality, seams by eliminating
changes in the thread tension caused by fluctuating oil levels.
Needle thread
feeding device
One-touch type
reverse feed switch
Needle thread
feeding device
One-touch type
reverse feed switch
Type
Dry-head type Minute-quantity lubrication type
Without automatic With automatic Without automatic With automatic
thread trimmer thread trimmer thread trimmer thread trimmer
Standard
LZ-2290A-DS
LZ-2290A-DS-7-WB
LZ-2290A-SS
LZ-2290A-SS-7-WB
LZ-2290A-DS-0B LZ-2290A-SS-0B
Anti-material-slip capability
LZ-2290A-DU
LZ-2290A-DU-7-WB LZ-2290A-SU LZ-2290A-SU-7-WB
LZ-2290A-DU-0B
Computer-controlled, Direct-drive, High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine
(dry-head type)
Computer-controlled, Direct-drive, High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine
with Automatic Thread Trimmer
Thread trimming mechanism notable for its simple structure and extremely
reliable performance
The machine comes with a needle thread
feeding device that feeds the needle
thread by only the required length at the
beginning of sewing.
The needle thread feeding device prevents
stitch skipping and slip-off of the needle
thread. It also greatly improves
workability by shortening the thread
remaining at the needle after it is trimmed.
The newly adopted push-button-type
reverse feed switch allows the
operator to re-position buttons at
desired locations. This prevents
maloperation when the operator
handles the material on the machine.
✱
✱
✱
✱
Proven thread trimming mechanism.
✱
✱
✱
✱
✱
The machine is equipped as standard
with a needle thread feeding device
A push-button-type reverse feed
switch is adopted
The bobbin thread is retained at a
low tension after thread trimming.
This allows the thread to smoothly
come off at the beginning of sewing,
thereby preventing thread hitching
and stitch gathering.
✱
Troubles are prevented at the
beginning of sewing by keeping
the bobbin thread tension low
04
ries
#
To Next Page
Loading...
Need help?
General
