EasyManua.ls Logo

JUKI MB-372 User Manual

JUKI MB-372
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTRUCTION MANUAL MANUAL
DE
INSTRUCCIONES
BETRIEBSANLEITUNG MANUALE D'ISTRUZIONI
MANUEL D'UTILISATION

Other manuals for JUKI MB-372

Question and Answer IconNeed help?

Do you have a question about the JUKI MB-372 and is the answer not in the manual?

JUKI MB-372 Specifications

General IconGeneral
BrandJUKI
ModelMB-372
CategorySewing Machine
LanguageEnglish

Summary

Important Safety Instructions

Safe Operation Guidelines

Before Operation Setup and Adjustments

Installation of Machine Head

Install the machine head onto the table using cushion, screws, washers, and nuts.

Threading the Machine

Thread the machine according to the numbered illustration, passing thread through the needle eye from the front.

Thread Tension Adjustment

Adjust thread tension using tension posts and nuts for sewing on buttons.

Needle-to-Looper Relation

Adjust needle bar height and looper position for proper relation to the needle.

Thread Tension Release Timing

Adjust thread tension release timing by turning tension post No. 2.

Automatic Thread Trimmer (MB-373)

Adjust moving knife position, height, clearance, and L-shaped lifting rod for thread trimming.

Troubleshooting and Corrective Measures

General Troubleshooting

Common issues like thread breakage, loose stitches, and thread trimming failures with solutions.

MB-373 Specific Troubleshooting

Specific issues for MB-373: thread trimming failure, needle thread cutting, and long thread trails.

Related product manuals