JUKI MO-2000QVP - Maintenance Procedures; Cleaning and Lubricating; Cleaning with Cloth Plate Opened; Replacing the Knife

33
Stitch
No.
Stitch
Needle
position
Thread tension
Cut-
ting
width
Stitch
length
Differ-
ential
feed
Roll
hem se-
lection
lever
2/3
thread
change-
over at-
tachment
Upper
knife
Left
nee-
dle
Right
nee-
dle
Upper
looper
Lower
looper
1
4-Thread overlock with
integrated safety seam
4.0 4.0 4.0 4.0 1-5 2.5 N
2
3-Thread super stretch
4.0 4.0 --- 2.5 1-5 2.5 N
3
3-Thread overlock
(left needle)
- 4.0 --- 4.0 4.0 1-5 2.5 N
4
3-Thread overlock
(right needle)
- --- 4.0 4.0 4.0 1-5 2.5 N
5
3-Thread Flatlock
(left needle)
- 1.0 --- 3.0 6.0 --- 2.5 N
6
3-Thread Flatlock
(right needle)
- --- 1.0 3.5 6.0 --- 2.5 N
7
3-Thread narrow seam
- --- 4.5 4.0 5.0 1.0 1.0 N
8
3-Thread roll hem
- --- 4.0 3.5 6.0 1.0 1.0 N
9
2-Thread wrapped
overlock (left needle)
- 5.0 --- --- 3.5 1-5 2.5 N
10
2-Thread wrapped
overlock (right needle)
- --- 4.5 --- 3.0 1-5 2.5 N
11
2-Thread Flatlock
(left needle)
- 2.0 --- --- 4.0 --- 2.5 N
12
2-Thread Flatlock
(right needle)
- --- 3.0 --- 5.5 --- 2.5 N
13
2-Thread roll hem
- --- 4.0 --- 5.0 1.0 1.0 N
14
2-Thread overlock
(left needle)
- 2.0 --- --- 5.0 1-5 2.5 N
15
2-Thread overlock
(right needle)
- --- 2.5 --- 6.5 1-5 2.5 N
4-Thread / 3-Thread2-Thread
* The scale marks of the tension regulating dial listed below are just a guide. The correct adjustment differs
according to the type of thread and material to be used.
Stitch chart