EasyManua.ls Logo

JUKI MO-2000QVP - WARNING Regarding Material and Needle Combinations

JUKI MO-2000QVP
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Do not wipe the sewing machine with solvent
such as thinner.
When the sewing
machine is soiled, put
a small quantity of
neutral detergent on a
piece of soft cloth and
carefully wipe off the
sewing machine with it.
Be sure to use the sewing machine in the
temperature range from 5ºC to 40ºC.
If the temperature is excessively low, the
machine can fail to operate normally.
WARNING
For the combination of the material and the thread and needle, in particular, refer to the explanation
table in “Replacement of the needle”.
If the needle or thread does not match the material used such as in the case that an extra heavy-
weight material (e.g., denim) is sewn with a thin needle (#11 or higher), the needle can break re-
sulting in an unexpected personal injury.
Other precautions
Do not put the sewing machine under the
direct sunlight or in a humid place.
Be aware that the following state can take place since the sewing machine incorporates semi-con-
ductor electronic parts and precise electronic circuits.
* The operating temperature of the sewing machine is between 5ºC and 40ºC. Do not use the sew-
ing machine under the direct sunlight, near the burning things such as a stove and candle, or in a
humid place. By so doing, the temperature in the interior portion of the sewing machine can rise or
the coating of the power cord can melt, causing re or electrical shock.

Related product manuals