JUKI MO-6816S - Adjusting the Thread Cam Equipment (Applicable Only to MO-6816 S); Adjusting the Thread Cam; Adjusting the Thread Cam Thread Guides a and B and the Thread Cam Nail; Positioning the Chain Looper Thread Guide

– 26 –
(15) Adjusting the thread cam equipment (Applicable only to MO-6816S)
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
Standard adjustment
1) Adjusting the thread cam
2) Adjusting the thread cam thread guides A and B and the thread cam nail
3) Positioning the chain looper thread guide
Level
❽
❶
❻
❽
1 to 2 mm
󱢴
󱢵
❽
❶
A
󱢶
󱢳
󱢸
󱢷❾
Straight line : OK
Level
❻
❼
󱢸
󱢷
󱢳
❾
Refracted line : NG
󱢶
❾
⊖
⊖
⊕
⊕
❷
B
❹
❺
❼
❻
❸