JUKI MO-735 Threading Chart

24 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

R

LL

C

LL

R

Threading Chart

of 2-needle, 4-thread overlock sewing

MO-735 P.1

.

.

1

Thread upper looper

2

Thread lower looper

Needle position

and

needle thread path.

1

2

3

4

3~5

3~5 3~5 3~5

Thread tension

Stitch length

2.5

Please thread in

numerical order 1~4.

1. Switch the machine off. (power switch "O")

2. Pull the release lever forward to activate the upper looper. (Page 44)

3. Push the button to lower the upper knife arm. (Page 44)

4. Lower the upper knife. (Page 12)

5. Attach the knife guard. (Page 45)

* For more details, please refer to instruction manual.

Threading preparations

Table of Contents

Other manuals for JUKI MO-735

Instruction Manual70 pages

Service Manual56 pages

Dealer Training Guide37 pages

Questions and Answers:

J
John SandersAug 31, 2025
Why are the fabric edges curling when using my JUKI MO-735?
- J
  Jeremy LopezAug 31, 2025
  If the fabric edges curl when using your JUKI Sewing Machine, it could be due to a few reasons. There might be too much fabric in the stitch, so try reducing the cutting width. Another possibility is that the thread tension is too tight, in which case you should reduce the thread tension. Lastly, check that the stitch selection lever is not set on roll hem; if it is, set it to overlock.
S
saravalenzuelaAug 30, 2025
How to troubleshoot a JUKI Sewing Machine that does not sew?
- N
  Nicole PowellAug 30, 2025
  If your JUKI Sewing Machine is not sewing, there are a few things to check. First, make sure that the looper or cloth plate cover is closed. If either is open, close them. Next, verify that the main switch is turned on (set to “I”). Lastly, ensure that the machine is properly plugged into the main socket.
S
Sonia NelsonAug 29, 2025
How to troubleshoot poor stitch formation on a JUKI MO-735?
- K
  Katie BlackwellAug 29, 2025
  If you're getting poor stitch formation with your JUKI Sewing Machine, make sure the threads are correctly positioned between the tension dials. Check if the thread is lying between the tension discs. Also, see if the thread has gotten caught and, if so, raise the presser foot and pull the thread. Finally, ensure the machine is correctly threaded by checking the threading path of each thread.
M
Matthew HendersonAug 28, 2025
How to fix a JUKI Sewing Machine that does not sew?
- B
  Brenda ForbesAug 28, 2025
  If your JUKI Sewing Machine is not sewing, make sure that the looper or cloth plate cover is closed. Also, check that the main switch is turned on (set to “I”).
M
Margaret MasseyAug 27, 2025
How to fix poor stitch formation on my JUKI MO-735?
- J
  Jennifer PhillipsAug 27, 2025
  If you notice poor stitch formation on your JUKI Sewing Machine, make sure the threads are correctly positioned between the tension dials. Check if the thread is lying between the tension discs. Also, ensure the thread hasn't gotten caught; raise the presser foot and gently pull the thread to release it. Finally, verify the threading path of each thread to ensure the machine is threaded correctly.
L
Lauren WilcoxAug 27, 2025
Why does the thread keep breaking on my JUKI Sewing Machine?
- J
  jamie39Aug 27, 2025
  If your JUKI Sewing Machine thread breaks, it might be due to several reasons. The thread tension could be too tight for the thread you're using, so try reducing the thread tension. Also, double-check that the machine is threaded correctly. Ensure the needles are correctly inserted fully into the needle clamp with the flat side to the back. Finally, make sure you're using the correct needles, specifically needle system 130/705H or JLx2.
H
harrisrichardAug 25, 2025
Why is my JUKI MO-735 skipping stitches?
- L
  lisajonesAug 26, 2025
  If your JUKI Sewing Machine is skipping stitches, ensure that the needles are not bent or blunt and replace them if necessary. Also, make sure you're using the correct needle system 130/705H, and type JLx2 for cover and chainstitch. If the presser foot pressure is too low, increase it.
L
Laura BowersAug 25, 2025
What to do if my JUKI Sewing Machine skips stitches?
- L
  Lawrence McgrathAug 25, 2025
  If you're experiencing skipped stitches with your JUKI Sewing Machine, start by replacing the needles if they are bent or blunt. Ensure you are using the correct needle system, such as 130/705H or JLx2. Also, try increasing the presser foot pressure.

JUKI MO-735 Specifications

General

Number of Threads	2/3/4/5
Maximum Stitch Length	4 mm
Stitch Length Range	1-4 mm
Differential Feed	Yes
Differential Feed Ratio	0.7-2.0
Rolled Hem	Yes
Cover Stitch Capability	Yes
Needle Type	130/705H
Overlocking Width	5-9 mm
Maximum Sewing Speed	1, 500 stitches per minute
Thread Tension	Manual
Presser Foot Lift	5 mm
Stitch Options	Rolled Hem
Power Requirements	120V AC, 60Hz
Weight	19.4 lbs

Related product manuals

Preview: JUKI MO-654

Preview: JUKI MO-804

Preview: JUKI MO-51e

Preview: JUKI MO-50e

Preview: JUKI MO-104D

Preview: JUKI MO-51EN