To Next Page

To Previous Page

Part No.

Description

Amt.

Req.

Ref.

No.

THREAD STAND

*2.

*3.

21101W6

21233KS

22651CD-5

28604R

Thread Stand, complete .................................................................................

Bracket Connection, marked “KS” .................................................................

Screw, for bracket connection .................................................................

Oil ...................................................................................................................

* These parts used with pedestal.

Preface2
Identification of Machines2
- Table of Contents3
- L1004
Description of Machines4
L1005
Replacement Parts6
Safety Rules7
Illustrations8
Identifying Parts8
Needles8
Application8
Torque Requirements8
Installation9
Oiling9
Threading10
Adjusting Instructions11
Setting the Needle Bar Height & Alignment11
Setting the Needle Bar Height & Alignment (Cont)12
Aligning the Cylinder12
Setting the Looper Travel Using Gauge 21227Cn12
Instructions for Using Synchronizing Gauge 21227Cg13
Setting the Looper Travel13
Timing the Needles to the Looper13
Timing the Needles to the Looper (Cont.)14
Looper Adjustments15
Looper Adjustments (Cont.)16
Setting the Front Needle Guard16
Setting the Feed Dogs16
Setting the Rear Needle Guard17
Setting the Stitch Length17
Differential Feed Control17
Setting the Presser Foot17
Setting the Presser Foot (Cont.)18
Setting the Presser Foot (Cont.)19
Setting the Knife Drive Lever19
Setting the Knife Drive Lever (Cont.)20
Setting the Trimming Knives for Flat Seaming (Styles 36200L100-52, L100-60, T300-52, T300-60, U300-52, U300-60)20
Setting the Trimming Knives for Lap Seaming (Styles 36200L100-52, L100-60, L200-52, L200-60, L202-52, L202-60, L210-52, L210- 60, U300-52, U300-60)20
Setting the Trimming Knives (All Styles) (Cont.)21
Needle Thread Adjustments21
Looper Thread Adjustment22
Cover Thread Adjustment22
Tension Release22
Hung Foot Adjustment23
Setting the Lap Former23
Lap Seaming23
Replacing Presser Foot Shoes24
Oil Sight Gauges, Top Covers & Miscellaneous Takeup & Eyelet Parts27
Main Frame, Bushings & Miscellaneous Eyelet & Cover Parts29
Main Shaft & Miscellaneous Oiling31
Crankshaft & Needle Lever Parts33
Tension Parts35
Detachable Head, Head Covers, Needle Bar & Needle Bar Head37
Detachable Head, Head Covers, Needle Bar & Needle Bar Head39
Differential & Main Feed Bars, Feed Dogs & Feed Lift Eccentric Assembly41
Feed Drive Assembly, Feed Rocker & Looper Avoid Parts43
Knife Driving Parts45
Looper Rocker Shaft & Looper Rocker Drive Parts47
Lap Former, Miscellaneous Cylinder Covers, Throat Plate, & Chain Cutting Knife49
Cylinder Bushings, Differential Feed Control Assembly & Miscellaneous Cylinder Covers51
Presser Foot for Styles 36200L200-52, L200-60, L201-60, L210-52, L210-60, U300-52, U300-6053
Presser Foot for Styles 36200L100-52, L100-60, T300-52, T300-60, U300-52, U300-6055
Presser Foot for Styles 36200L202-52, L202-6057
Presser Foot Shoe Chart58
Presser Foot Shoe Chart59
Thread Stand61
Miscellaneous Gauges & Tape Reel Parts63
Thread Lubricator65
Numerical Index of Parts66
Numerical Index of Parts67

Brand	JUKI
Model	Union Special 36200 CLASS Series
Category	Sewing Machine
Language	English

JUKI Union Special 36200 CLASS Series User Manual

Table of Contents

Questions and Answers:

JUKI Union Special 36200 CLASS Series Specifications

Related product manuals