ENGLISH
63
Fig. 16
Install the screw hook on the right hand leg with two
6 mm washers and two M6 nuts. The hook is
intended for hanging the feeder and the key for the
saw blade.
Install the two transport handles on the left and righ
hand legs using four M6 x 16 hexagonal screws, fou
6 mm washers and four M6 nuts.
Fig. 16
Installing longitudinal fence (fig. 17, 17.1
Install the bearing blocks on the clamp. Install the
clamp on the bench with two M6 x 30 screws, two A6
toothed washers, 4 and 2 hex nuts.
Fig. 17
Fig. 17.1
To Next Page
