ENGLISH
64
Installing parallel fence, fig. 18
Install the intermediate plate on the fence using two
M6 x 50 round-headed screws, two A6 washers and
two wing nuts. Slide the stop rail onto the
intermediate plate and secure it with the wing nuts.
Labelling
1 = upper side
2 = lower side
Lift the lever to lock, press the lever down to release.
Fig. 18
Changing the saw blade, fig. 19
IMPORTANT:
Turn off the apparatus and unplug the power cord
before starting work.
Undo the dust extraction cover's wing screw and
remove the cover.
Fig. 19
Fig. 20
Undo the four crosshead screws holding the bench
insert and remove the insert.
Fig. 20
To Next Page
