Julabo F25-HE - 4. Operating Controls and Functional Elements; Unit Views (Front and Rear)

88 pages

Save Page as PDF

To Next Page

To Previous Page

4. Operating controls and functional elements

Front view Rear view

FPW50

www.calcert.com sales@calcert.com1.888.610.7664

Main Page

Table of Contents3
Operating Manual5
Intended Use5
Description5
Operator Responsibility - Safety Recommendations6
Disposal8
Warranty Conditions8
EC Conformity9
Technical Specifications14
Cooling Water Connection19
Operating Instructions20
Safety Notes for the User20
Explanation of Safety Notes20
Explanation of Other Notes20
Safety Recommendations21
Operating Controls and Functional Elements23
Preparations27
Installation27
Bath Fluids28
Temperature Application to External Systems30
Tubing31
Filling/Draining32
Operating Procedures33
Power Connection33
Switching On/Start - Stop33
Switching on the Circulator33
Switching on the Cooling Machine34
Setting of Temperatures35
Using the Pre-Settings in the Menu35
Direct Setting of Temperatures36
Safety Installations, Warning Functions37
Excess Temperature Protection37
Early Warning System, Low Level Protection38
Switch-Over from Warning to Shutdown Function39
Over and Sub Temperature Warning Function40
Menu Functions41
Menu Program - Start42
MENU PROGRAM - Creation, Administration45
MENU PUMP - Setting of Pump Pressure47
MENU CONFIG - Configuration of Unit48
Remote Control Via the Serial Interface49
Keypad Control or Setpoint Setting Via the Analog Input50
Autostart50
Off-Mode51
ACTVAR - Actuating Variable51
Setting of Clock and Date52
RESET - Factory Settings52
MENU CONTROL - Control Characteristics and Parameters52
CONTROL - Control INTERNAL/EXTERNAL54
Selftuning55
Dynamic Internal55
Control Parameters- XP-, TN-, TV- INTERNAL56
COSPEED - External57
Control Parameters - XPU-, XP-, TN-, TV- EXTERNAL57
Menu Serial - Baudrate, Handshake, Parity58
MENU ATC - Absolut Temperature Calibration59
Atc Sensor - Internal/External61
Atc Status - Yes/No61
Calibration Type: 1 -/ 2 -/ 3 Point62
Example: 3-Point Calibration for Internal Control63
Menu Limits65
Limits for Internal Control66
Limits for External Control66
MENU IN/OUT - Analog Inputs/Outputs (Option)68
Outputs of the Connector - REG+E-PROG71
Input of the Connector - REG+E-PROG72
ALARM-Output/Stand-By-Input74
10. Troubleshooting Guide/Error Messages76
11. Electrical Connections79
12. Remote Control81
Setup for Remote Control81
Communication with a PC or a Superordinated Data System81
List of Commands82
Status Messages85
Error Messages85
13. Installation of Electronic Module86
14. JULABO Service - Online Remote Diagnosis87
15. Cleaning/Repairing the Unit88

Julabo F25-HE - 4. Operating Controls and Functional Elements; Unit Views (Front and Rear)

Table of Contents

Other manuals for Julabo F25-HE

Related product manuals