Julabo F26-ED - Use according to intended purpose

Operating manual
4
Operating manual
1. Use according to intended purpose
JULABO circulators have been designed for temperature application to specific fluids
in a bath tank. The units provide pump nozzles for temperature application to an
external system (loop circuit).
JULABO circulators are not conceived for direct temperature application
to food and luxury articles or pharmaceutical and medico-technical
products. Direct temperature application means: Unprotected contact of
the object with the bath medium (bath fluid).
1.1. Description
PID1
IEC
EN
DIN
 The circulators are operated via the splash-proof keypad. The
implemented microprocessor technology allows to set and to store the
setpoint that can be indicated on the LED temperature display.
 The PID temperature control adapts the heat supplied to the thermal
requirements of the bath.
 Safety installations conforming to IEC 61010-2-010
The excess temperature protection is a safety installation independent
from the control circuit.
The safety value is set using a tool (screwdriver).
If the low level protection device is triggered, a complete shutdown of
the heater and circulating pump is effected.
 The circulator conforms to the relevant requirements specified by
European guidelines.