JUMO dTRANS CR 02 User Manual

16 Appendix
106
Supply frequency 50 Hz
60 Hz
Temperature input
Temperature sensor No sensor
Pt100
Pt1000
Cust. specs.
0to20mA
4to20mA
0to10V
2to10V
Resistance transmitter
Unit °C/°F
%
Without unit
Cust. specs.
Scaling start -100.0 to 0.0 to 499.9 °C
Scaling end -99.9 to 100.0 to 500.0 °C
Filter time constant 0.0 to 2.0 to 25.0 seconds
Manual temperature -99.9 to 25.0 to +99.9 °C
Offset -99.9 to 0.0 to +99.9 °C
Optional inputs
Analog inputs 1 to 3
Operating mode Off
Linear
Temperature
pH measurement
Conductivity
Concentration
Cust. specs.
Stroke feedback
Chlorine, pH-compensated
Signal type 0to20mA
4to20mA
0to10V
2to10V
0to1V
Pt100
Pt1000
Cust. specs.
Connection type 2-wire
3-wire
4-wire
Display format XXXX
XXX.x
XX.xx
X.xxx
Parameter Selection/value range
Factory setting
New setting

JUMO dTRANS CR 02 Specifications

General

Brand	JUMO
Model	dTRANS CR 02
Category	Controller
Language	English