Need help?Do you have a question about the JUMO dTRON 316 and is the answer not in the manual?
Detailed overview of the controller series, its applications, and key features.
Details the basic types and configurations of the JUMO dTRON controllers based on their model numbers.
General guidelines and precautions for electrical installation and wiring to ensure safety and proper function.
Detailed wiring diagrams for Type 703041, showing terminal connections for setup.
Wiring diagrams for Types 703042/43/44, showing supply and output terminal connections.
Identifies and explains the function of each display element and control key on the instrument's front panel.
Explains the hierarchical structure of operating levels and navigation principles within the instrument's interface.
Explains how to access the Operator level and lists the process variables and setpoints that can be viewed and edited.
Provides detailed descriptions of controller parameters like proportional band, derivative time, and reset time for tuning.
Covers the configuration of analog inputs, including sensor type selection and linearization methods.
Details measurement offset, display settings, filter time constant, and heater current monitoring for analog inputs.
Configuration options for controller type, control action, manual mode, and range output settings.
Defines the instrument's primary function as fixed-setpoint, ramp, or program generator.
Explains the configuration of analog and binary outputs, including numbering and types.
Describes how to assign functions to binary inputs and limit comparators for flexible control logic.
Configuration parameters for RS422/485 and PROFIBUS-DP interfaces for communication setup.
Explains automatic tuning methods (oscillation, step response) for optimizing PID/PI controller performance.
Comprehensive technical specifications for inputs, outputs, sensors, and electrical characteristics.
Lists error codes, their causes, and recommended fault removal or repair procedures.
Detailed overview of the controller series, its applications, and key features.
Details the basic types and configurations of the JUMO dTRON controllers based on their model numbers.
General guidelines and precautions for electrical installation and wiring to ensure safety and proper function.
Detailed wiring diagrams for Type 703041, showing terminal connections for setup.
Wiring diagrams for Types 703042/43/44, showing supply and output terminal connections.
Identifies and explains the function of each display element and control key on the instrument's front panel.
Explains the hierarchical structure of operating levels and navigation principles within the instrument's interface.
Explains how to access the Operator level and lists the process variables and setpoints that can be viewed and edited.
Provides detailed descriptions of controller parameters like proportional band, derivative time, and reset time for tuning.
Covers the configuration of analog inputs, including sensor type selection and linearization methods.
Details measurement offset, display settings, filter time constant, and heater current monitoring for analog inputs.
Configuration options for controller type, control action, manual mode, and range output settings.
Defines the instrument's primary function as fixed-setpoint, ramp, or program generator.
Explains the configuration of analog and binary outputs, including numbering and types.
Describes how to assign functions to binary inputs and limit comparators for flexible control logic.
Configuration parameters for RS422/485 and PROFIBUS-DP interfaces for communication setup.
Explains automatic tuning methods (oscillation, step response) for optimizing PID/PI controller performance.
Comprehensive technical specifications for inputs, outputs, sensors, and electrical characteristics.
Lists error codes, their causes, and recommended fault removal or repair procedures.
General| Control Algorithm | PID control |
|---|---|
| Housing | Plastic housing |
| Ambient Temperature | 0 to 50 °C |
| Frequency | 50/60 Hz |
| Outputs | Relay, analog, and digital outputs available |
| Power Supply | 24 V AC/DC or 100-240 V AC |
| Communication | RS485 |
| Mounting | Panel mount |
| Dimensions | 96 x 48 x 112 mm (H x W x D) |
| Protection Class | IP20 |
To Next Page
