Need help?Do you have a question about the JUMO DICON 501 and is the answer not in the manual?
Guide to understanding the model number and its components.
Important guidelines for safe and compliant electrical installation of the instrument.
Visual representations of electrical wiring for Type 703580.
Wiring diagrams for Type 703585, covering interfaces, outputs, and inputs.
Identifies and describes the instrument's displays, status indicators, and control keys.
Details how to start, alter, and hold profile programs during automatic operation.
Overview of profile program creation, including segments, setpoints, times, and contacts.
Lists main configuration sub-sections (Inputs, Outputs, etc.) and their page references.
Configuration of controller type (PID, PI, etc.) and control direction (direct/inverse).
Explains limit comparator functions (Ik1-Ik8) and their basic setup.
Configuration of profile controller function, restart behavior after power failure.
Configuration options for mathematics functions (ratio, difference) and logic functions.
How to assign functions to logic inputs, limit comparators, contacts, and program signals.
Configuration of communication interface parameters like protocol, baud rate, parity, and stop bits.
Explains the process of self-optimisation for PID/PI controllers and how to start it.
How to check controller response after optimisation and identify maladjustments.
Configuration and effect of fuzzy logic parameters (Fc1, Fc2) on controller performance.
Information on the setup program for configuration, parameter transfer, and graphical display.
Comprehensive table of alarm messages, their causes, assignments, and error handling procedures.
Guide to understanding the model number and its components.
Important guidelines for safe and compliant electrical installation of the instrument.
Visual representations of electrical wiring for Type 703580.
Wiring diagrams for Type 703585, covering interfaces, outputs, and inputs.
Identifies and describes the instrument's displays, status indicators, and control keys.
Details how to start, alter, and hold profile programs during automatic operation.
Overview of profile program creation, including segments, setpoints, times, and contacts.
Lists main configuration sub-sections (Inputs, Outputs, etc.) and their page references.
Configuration of controller type (PID, PI, etc.) and control direction (direct/inverse).
Explains limit comparator functions (Ik1-Ik8) and their basic setup.
Configuration of profile controller function, restart behavior after power failure.
Configuration options for mathematics functions (ratio, difference) and logic functions.
How to assign functions to logic inputs, limit comparators, contacts, and program signals.
Configuration of communication interface parameters like protocol, baud rate, parity, and stop bits.
Explains the process of self-optimisation for PID/PI controllers and how to start it.
How to check controller response after optimisation and identify maladjustments.
Configuration and effect of fuzzy logic parameters (Fc1, Fc2) on controller performance.
Information on the setup program for configuration, parameter transfer, and graphical display.
Comprehensive table of alarm messages, their causes, assignments, and error handling procedures.
General| Protection class | IP65 |
|---|---|
| Power supply | 110 to 240 V AC +10/-15 %, 48 to 63 Hz or 20 to 30 V AC/DC |
| Input channels | 4 |
| Output channels | 4 |
| Weight | Approx. 250 g |
| Display | LED |
| Outputs | Up to 4 |
| Control type | PID |
| Communication | RS-485 |
| Communication interface | Modbus RTU |
| Operating temperature range | -10 to 55 °C |
| Dimensions | 96 mm x 48 mm x 130 mm (3.78 in x 1.89 in x 5.12 in) |
To Next Page
