EasyManua.ls Logo

JUMO EM-50 - Identification Marking

JUMO EM-50
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
2 Introduction
You will find the Declarations of conformity at www.jumo.en.
Products
Temperature
Monitor/Limiter
Electromechanical
Panel-mounting thermostats 602021
Documentation
Declaration of conformity/White Paper
Ask for them to be sent.
CAUTION!
Failure of the device
Cutting or kinking the capillary of the device leads to permanent failure of the functions!
Physical and toxicological properties of the expansion fluid that may escape in the event of a system
fracture.
NOTE!
At present, there is no restrictive statement from the health authorities concerning any danger to health
over short periods and at low concentration, e.g. after a fracture of the measuring system.
2.3 Identification marking
Depending on the version (for details see nameplate):
Control range
with end of scale
Dangerous
reactions
Fire and explosion hazard Water
contamination
Toxicological data
Ignition
temperature
Explosion limit Irritant Danger
to health
Toxic
< 200 °C No 355 °C 0.6 to 8 % v/v Yes Yes See note No
≥20C
≤35C
No 490 °C - Yes Yes See note No
>35C
≤50C
No No No No No No No
PED
Pressure
Equipment
Directive
®

Related product manuals